When choosing the best Antminer S9 and S7, one has to think about the mining software which is used miners machine shop. Some of the popular mining software on the market today includes CGMiner and BFGMiner. These are two very popular mining software that is easy to use and run with and there are many tutorials available online for how to install them.
The easiest method for getting these miners to work is to use their GUI which allows the user to control each miner from the same interface, this can be very useful for new users who don't want to deal with setting up their miners themselves. They will be able to get the mining software up and running and will be able to start mining with minimal difficulty.
Once you have found the software that you are most comfortable with it is time to check the difficulty and retry the process again until you get it to work. The retry times vary depending on your personal experience but it should only take around an hour to start mining. Keep in mind though that the longer it takes you to mine the more money you are losing on your machine. If you want to make a profit here is what you need to do:
- Use a very easy way to mine - The Antminer S7 will take around 20 minutes to start mining. This is because it needs a voltage change to start mining, so a simple way to get it to start mining is to use the supplied USB cord. Check the difficulty again before you decide to change anything to speed up the process.
- Turn off the miner completely - If you have any power on it will burn out and you will not be able to make a profit mining. You should also unplug the cable from the miner and unplug the USB from the machine as well to keep any excess heat from burning your hands. Do not even try to remove the miner without this step.
- Go back to your current settings - You should try to keep all the settings in order until you get the Antminer to work. When you have run through this step, wait for the miner to come up and then power it down and leave it for a few hours. When you turn it back on you should try the settings again and see if it runs.
- Try a different USB cord - If the first USB doesn't work try changing the cord you are using. You can get a USB cord from a local store or you can order it online top mining shop. The directions will tell you which type of cord to buy.
When you are getting into this, you will find it easy to get going but you will soon find that the best mining equipment won't run without a good guide to follow. You will find it easy to mine with the new Antminer S7 and S9 if you follow the guides and tutorials available online. A good guide to follow will also help you avoid making the mistakes that new miners make when trying to get the machines to work.
